GPS บอดี้ iphone style (PV) 4.8" 800x480 CPU 533MHz RAM 128MB ROM 4GB
GPS บอดี้ iphone style (PV) 4.8" 800x480 CPU 533MHz RAM 128MB ROM 4GB
Firmware
App Version: 091216.1824.QC21.SD
Os Version: N100121E100121O0912301754
SiRF Atlas IV AT840
SiRF ARM1136JF-S-AT840
Board A4
AT8X1A 6.0
533MHz with 250MHz DSP
5.0"
800x480 pixels Resolution
65536 Colors
128MB RAM
4GB ROM
FM Transmitter
No Bluetooth
AV In
Hot Start: 9 Seconds
Warm Start: 18 seconds
Cold Start: 43 seconds
App Version: 091216.1824.QC21.SD
Os Version: N100121E100121O0912301754
SiRF Atlas IV AT840
SiRF ARM1136JF-S-AT840
Board A4
AT8X1A 6.0
533MHz with 250MHz DSP
5.0"
800x480 pixels Resolution
65536 Colors
128MB RAM
4GB ROM
FM Transmitter
No Bluetooth
AV In
Hot Start: 9 Seconds
Warm Start: 18 seconds
Cold Start: 43 seconds
Re: GPS บอดี้ iphone (PV) 4.8" 800x480 CPU 533MHz RAM 128MB ROM 4GB
Enable ActiveSync
Edit file \ResidentFlash2\MyShell\PvReg.reg otherwise it will reset after reboot.
Note: We can't edit it :-(
Edit file \ResidentFlash2\MyShell\PvReg.reg otherwise it will reset after reboot.
Code: Select all
[HKEY_CURRENT_USER\ControlPanel\AppleStyleUISetting]
"UsbEnableActiveSyncMode"=dword:1
Re: GPS บอดี้ iphone (PV) 4.8" 800x480 CPU 533MHz RAM 128MB ROM 4GB
Go to Desktop
Click the lower left conner 5 times then click the lower right conner 1 time.
Click the lower left conner 5 times then click the lower right conner 1 time.
Re: GPS บอดี้ iphone style (PV) 4.8" 800x480 CPU 533MHz RAM 128MB ROM 4GB
1. รัน Garmin แล้วมีปัญหา เวลาจะเชพ POI จะเด้งออกจากโปรแกรมเสมอ จะเชพได้บางครั้งเท่านั้น
2. ขอบ LCD ไม่เสมอกับขอบดำ
3. เป็น USB 1.0 เท่านั้น
4. ไม่สามารถทำ shortcut เพื่อ Power Off ได้
5. จะต้อง calibrate หลอกหน้าจอ เพื่อให้พอดีกับ LCD ที่แสดงผล
สรูป ไม่แนะนำให้ซื้อตระกูลนี้
2. ขอบ LCD ไม่เสมอกับขอบดำ
3. เป็น USB 1.0 เท่านั้น
4. ไม่สามารถทำ shortcut เพื่อ Power Off ได้
5. จะต้อง calibrate หลอกหน้าจอ เพื่อให้พอดีกับ LCD ที่แสดงผล
สรูป ไม่แนะนำให้ซื้อตระกูลนี้
Re: GPS บอดี้ iphone style (PV) 4.8" 800x480 CPU 533MHz RAM 128MB ROM 4GB
Hello I have blocked my GPS - by ? wrong flash from N470_ROM.rar (i have copied a content nk.bin tinynk.bin etc. to SD card and it deleted my paritions.) Is anywhere a flash/rom bin for this device? 800x480px, Thank you for any info about what to do. Br,Igor
Re: GPS บอดี้ iphone style (PV) 4.8" 800x480 CPU 533MHz RAM 128MB ROM 4GB
I don't know too. Since each device look like same body but inside difference. Chinese factory can clone anything but inside is not the same. So I won't flash it.
Re: GPS บอดี้ iphone style (PV) 4.8" 800x480 CPU 533MHz RAM 128MB ROM 4GB
Hello Tong, thank you very much for this answer :-) Anyway,my device is working again :-). (and looks like yours on your pictures...) So let me shortly describe what I did wrong:
I have put some files that are able(I think, I do not know if they are realy working..)
to change usb mode when device sarting up.
Names of he files were
SecurityPNDJob1699.exe, NK.BIN, tinyn.nk and some others....
It does not mater but what I want to say is...
When I have had this files loaded inside device in ResidentFlash it was possible to delete them and start device normaly.... (I was "playing" with this files...)
BUT AFTER I HAVE PUT these files to SD card and resetet device, this deleted my partitions! So THAT was wrong - imagine, I am newbee so I did not realised that
device is trying to excute SecurityPNDJob1699.exe from SDcard if it is pressent and then is allowing to it to re-create partitions.....!!!
I was only trying to make backup of my device (of ResidentFlash and of ResidentFlash2(that is hidden and is possible to get its conntent by ActiveSync in changed usb mode - should not be a mass storage bu must be in some serial mode...?)
On this/my device is possible to enter "2" to the addressbar and is possible to see conntent. so now I know this - but late :-)
It helped me that I have found a right flash because o my display was
written (after re-created partitions) only this:
installed: N20100121, E20100121, PF68F_V2.8_E100121_128ZentelDDR_SD_800x480_Hanstar_CH_RK_OS1001211010_APP100118
So this points me to get "the right conntent" of those files (mentioned above...:-)
(and to "play" with wrong cards onthe SD card..)
something interesting for others could be a bit of my script here:
I can say hat my device is running PVShell.exe and I am using this MortScript lines to close this PVShell.exe and get to windows desktop: (get_to_desktop.mscr):
I have put some files that are able(I think, I do not know if they are realy working..)
to change usb mode when device sarting up.
Names of he files were
SecurityPNDJob1699.exe, NK.BIN, tinyn.nk and some others....
It does not mater but what I want to say is...
When I have had this files loaded inside device in ResidentFlash it was possible to delete them and start device normaly.... (I was "playing" with this files...)
BUT AFTER I HAVE PUT these files to SD card and resetet device, this deleted my partitions! So THAT was wrong - imagine, I am newbee so I did not realised that
device is trying to excute SecurityPNDJob1699.exe from SDcard if it is pressent and then is allowing to it to re-create partitions.....!!!
I was only trying to make backup of my device (of ResidentFlash and of ResidentFlash2(that is hidden and is possible to get its conntent by ActiveSync in changed usb mode - should not be a mass storage bu must be in some serial mode...?)
On this/my device is possible to enter "2" to the addressbar and is possible to see conntent. so now I know this - but late :-)
It helped me that I have found a right flash because o my display was
written (after re-created partitions) only this:
installed: N20100121, E20100121, PF68F_V2.8_E100121_128ZentelDDR_SD_800x480_Hanstar_CH_RK_OS1001211010_APP100118
So this points me to get "the right conntent" of those files (mentioned above...:-)
(and to "play" with wrong cards onthe SD card..)
something interesting for others could be a bit of my script here:
I can say hat my device is running PVShell.exe and I am using this MortScript lines to close this PVShell.exe and get to windows desktop: (get_to_desktop.mscr):
Code: Select all
....
Run("\ResidentFlash\utils\BananaPC.exe")
proc2="\ResidentFlash2\MyShell\PVShell.exe"
proc="PVShell.exe"
a = ProcExists(proc)
While ( a eq 1 )
#message("chci zevrit proces:" & proc)
kill(proc2)
sleep(300)
a = ProcExists(proc)
EndWhile
proc="Shell.exe"
a = ProcExists(proc)
While ( a eq 1 )
#message("chci zevrit proces:" & proc)
kill(proc)
sleep(300)
a = ProcExists(proc)
EndWhile
Delete("\windows\desktop\MainMenu.lnk")
Delete("\windows\desktop\Internet Explorer.lnk")
XCopy("\ResidentFlash\launchpad\desktop\*.*" , "\windows\desktop", 1)
Run("\windows\explorer.exe")
....