Fixed: Disable WOL but LAN LED still flashing after shutdown PC

Post Reply
tong
Site Admin
Posts: 2386
Joined: Fri 01 May 2009 8:55 pm

Fixed: Disable WOL but LAN LED still flashing after shutdown PC

Post by tong »

How to disable LAN LED flashing after shutdown the PC

1. Disable "Wake On Lan" (WOL) in the BIOS. If it didn't work continue to the next step.

2. Disable "Allow this device to wake the computer" in the ethernet properties. If it didn't work continue to the next step. 01 WOL.png 3. Disable all "Wake On LAN" in the Advanced tap. If it didn't work continue to the next step. 03.png 04.png 05.png 4. On some mainboard, You need to disable ErP in the BIOS.

In fact, Enable ErP should disable all wake functions but it does ignore/unread WOL settings.
I don't known this is bug from Intel driver or Gigabyte BIOS.
Post Reply